If it is a novice, it is recommended to use the grinding machine produced by the Dongri nail polishing machine manufacturer, because it can better protect the nails! When removing the armor, the choice of the most afraid of poor control and the direction of polishing can try the method provided by the nail polishing machine manufacturer:

First gently grind it with a polished machine on the upper, middle and lower positions of the nail surface, because the nail surface is arc, and after three points are grinded, the arc of the nail surface can be polished from high to low;

After the glue of the middle part of the nail surface is finished, there are also edges and some residual glue. At this time, the speed of rotation is needed to be adjusted lower, and the polishing head and the nail surface should be kept below 45 degrees.

When there is residual color on the nail surface, change the grinding head to the sand circle. Pay attention to the ceramic grinding head to polish it vertically.

After polishing the clean color, use a dust brush to sweep the nail surface for a few laps to clean the armor dust and complete the armor unloading!

In addition to the two grinders above, this polishing machine is also equipped with a few very practical nursing heads: